FREEBORD ASSEMBLY

Tools you will need:
– Phillips Screwdriver
– 10mm socket or crescent wrench

Step 1:
Find the ten pre-drilled mounting holes on the underside of the deck.
Poke holes through grip tape.

Step 2:
Mount both castors to the deck with the nuts on the road side.
They can be mounted either way, but we recomend to have the star logo towards the center of the deck.

Step 3:
Mount the hangers and binding baseplates ate the same time.
Use the four longer screws to go through the binding base, deck and then the hanger.

Step 4:
Insert the binding base into the slot in the bindings topper.
Use the small silver screws to secure the topper at the haight you like.

Tools you will need:
– Phillips Screwdriver
– 10mm socket or crescent wrench

Step 1:
Find the ten pre-drilled mounting holes on the underside of the deck.
Poke holes through grip tape.

Step 2:
Mount both castors to the deck with the nuts on the road side.Make sure the star logos are towards the ends of the deck.

Step 3:
Mount the hangers with the pivot cups towards the ends of the deck.
Make sure the nuts are on the roadside of the deck.

Step 4:
Insert the binding base into the slot in the bindings topper.
Mount the bindingsuseing the remaining holes in the deck.
Put the nuts on the grip side of the deck.
Use the small silver screws to secure the topper at the haight you like.